Helical screw piles & auger fillerdescription
helical screw piles & auger fillertype
(1) For 14" (36cm) diameter foundation anchors, reduce allowable
capacity by 20% per building code requirements. Not applicable to
HS.
The nature of the proposed application usually gives a clue to the
soil type. By determining the soil classification using
geotechnical surveys or the Chance Soil Probe and a knowledge of
the expected loads it is possible to decide on the most suitable
anchor. In general the 60 round HS screw piles are for soils class
4 to 8.
The SS150 and SS175 square anchors and 89 round HS anchors work
with soils from 8 to 3 and the rock version of the 89 round screw
pile will penetrate soils up to class 1. Specific rock anchors
perform well in class 0 soils but require a pre-drilled hole.
A wide range of termination components are produced to connect the
pile to the load.
Scope of application
Class 1 soils are difficult to probe consistently and the ASTM blow
count may be of questionable value
** It is advisable to install anchors deep enough, by the use of
extensions, to penetrate a Class 5 or 6, underlying the Class
7&8 soils.
The column ‘probe values’, refers to torques measured using the
Soil test probe available from ABC. This kit enables a single
operator to perform a practical test to help determine anchor
configurations and performance.
In general standard anchors can be used in soils from Class 8 up to
Class 4. Rock anchors will give excellent results in Class 1 & 2
soils. However when subjected to tension loads care must be taken
to ensure adequate depth of soil over the highest helix.
It is essential that regular testing of installed anchors is used
as a back up to torque monitoring. This is the only way to ensure
that installers and specifiers maintain confidence in the system.
ABC can supply test equipment for quality control and insist on its
use by qualified installers..
helical screw piles & auger fillerspecification
| Specifiation | 60mm round light Piles | 60mm round HS Screw Piles | SS150
square shaft 1½" (38mm) | SS175
square shaft 1¾" (45mm) | 76mm round HS Piles | 89mm round HS Screw Piles | | Maximum installation torque (kNm) | 2.0 | 4.0 | 9.5 | 13.5 | 16 | 25 | | Ultimate material strength kN for axially loaded foundation | 80 | 155 | 300 | 440 | 448 | 700 | | Pile capacity at maximum permitted torque kN | 60 | 120 | 300 | 440 | 448 | 560 | | Pile capacity with 2.0 factor of safety kN | 30 | 60 | 150 | 220 | 224 | 280 | | Ultimate strength per Helix – Tension/Compression kN | 45 | 90 | (1) 180 | (1) 220 | 220 | 220 | | Working Capacity per Helix – Tension/Compression kN with 2.0 safety
factor | 23 | 45 | (1) 90 | (1) 110 | 110 | 110 |
|
Customer Satisfaction
We follow ethical business practices and transparent business
deals, which makes us a reliable and trusted business associates
among our clients. We have a dedicated team that enables us to
offer quality range of precision engineered equipment. Besides, we
also offer custom-made products to meet the individual requirements
of our clients. We have become a force to reckon with as we ensure
- Quick solution to customers’ requirements
- Goodwill in the market
- Cost effective products and services
- Safe packing
- On-time delivery
- Prompt after-sales services
In addition to this, our quality conscious approach coupled with
dedication towards technological advancement has given us an extra
edge over our competitors.
When To Use Foundation Helical Piers
With knowledge of local soil conditions, helical piers can be an
ideal solution because the installing contractor will know exactly
how deep to install the piers to reach a stable soil layer than can
support your home. If your goals are the following, helical piers
are a good choice:
- You need the best opportunity to lift your home back to its
original position.
- Lighter structures, such as decks or stoops, are in need of
stabilization.
- You'd like minimal disturbance during installation.
- You're looking for a fast, effective installation.
- Restoring your property value is a priority.
Helical screw piles & auger filler application
Quality Assurance
Being quality-centric organization, we make sure that every product
is designed and developed with meticulous attention to quality
standard. At our modern manufacturing unit, everything is prepared
using high grade of raw materials. We procure raw materials from
world's well known vendors who have spent years in this business
domain. In order to maintain the quality level, our quality
analysts not only keep vigil eye over the entire manufacturing
process but also conduct all required tests. Tests are carried out
keeping Indian standards in mind.
Other products
